Adapt your needs on filtering easily and keep the maintenance in filtering under control with the versatile solution in filtering: the CLEAN DISC
HOW IT WORKS. The innovating solution of SC-Clean-D is simple and effective: the central axle has been eliminated and the disks are mounted on driving rolls; the rotating movement is transmitted to each disk by means of a pinion mounted on the axle of the motor reducer gearing with the external edge of the disk. In this way the disks are easily removed from their site without using any tool, and in few minutes can be deeply cleaned, even by high pressured water, or, if spare disks are available, can be replaced with clean disks. The level of filtering efficiency is always high, and we can prevent an irreversible obstruction of the filtering nets.
• Use it for different needs: With a set of disks with different thickness available at the customer's site it is possible to obtain a quick fitting of the machine to the different needs.
• Easy maintenance The breakage of a net only involves the replacement of the damaged disk that can be repaired without the intervention of an engineer.
• Assisted cleaning The filtering nets are periodically cleaned by means of a system consisting of counter -washing nozzles at the end of the working cycle
TECHNICAL PRINCIPLES: The SC-Clean-D microfilters consist of a tank divided into three sections: feeding, clarified discharge and excess liquid. The flowing back liquid is pumped to the feeding section, it flows through the space between the couples of rotating disks covered with filtering net. Water filters through the net and passes to the discharge section, while the solids particles are retained inside the disks. During their gradual increase in quantity they form compact masses that, scraping the inner surface of the filtering nets, keep them clean. When the retained solids parts exceed a certain volume, the machine automatically begins to discharge them.