One4Leather writes that statistics tell us that 1 in 100,000 people died in fires between 2001 and 2016. Yet in vehicles, the chance of this happening is twice as high. This is based on numbers reported by the Center of Fire Statistics (CTIF). This number is significant and each life lost to fire is one too many. That’s why it is important, when we choose the materials for our homes and cars, to look beyond comfort and appeal. We can enhance our safety quite a lot with the right material choices and measures. Leather, as one of those material options, has the great benefit of natural flame retardant properties, which is vital when the stakes are highest.
Safety from fire when every second count
There are a number of ways to test the flammability of materials and commonly this is done according to specifically set ISO standards (or ANSI in the United States). These standards allow for a universal way of measuring the flame retardancy by comparing the way materials react. We could let the hare and tortoise run the same race in water and the result would be very different. That’s why these standards matter; where samples are exposed to heat and flames in standard conditions and the burning speed is monitored for comparison. The slower the fire races down a sample of the material, the more flame resistant it is.
ISO-standards for interior material and leather used to assess the flammability are ISO 3795:1989 (E), EN ISO 6940:2004 and ISO-5660 – 1:2002 (E) (now revised by ISO 5660-1:2002). The methods are very strictly described. With these tests, the qualities of natural leather on flame resistance become abundantly clear:
- Exposing natural leather to temperatures of 130-170°C for extended periods does not do any structural damage.
- Leather can resist short-time exposure to temperatures up to 200°C.
- Extended exposure to temperatures above 200°C results in pyrolysis (the material decomposes, or burns, which is obviously irreversible).
Now, extensive testing proves that leather outperforms other materials when it comes to flame resistance, such as fabrics or synthetics. It also is resistant to ignition, which is particularly relevant for fire prevention as 80% of fires are associated with “flashover”, which is what we call the fast and sudden spread of fires. Slowing down the fire and building material barriers into automotive upholstery helps to prevent this from occurring, but is the natural quality of leather in resisting heat up to 200°C enough?
Flame retardants to enhance natural qualities
During a car fire, it’s only a matter of minutes until temperatures soar to an astonishing 900°C. During experiments, it becomes clear how vital the flame-retardant properties actually are, as the first few minutes of smoldering are still at lower temperatures, before the flames spread and ‘flashover’ occurs. This is where leather can buy you vital time, particularly with flame retardant technology (treatment with fire retardant chemistry) that slows down the ignition and eventual combustion. It is the last line of defence that can make the difference between life and death. That’s why flame retardants matter, as they enhance the properties that are already there.
And that is again where leather has the advantage, as its natural qualities can be improved during the whole production process from tanning to finishing (and aftercare). Other materials mostly rely on treatment during the finishing stage, where leather is enhanced to its very fibers. The difference? When the burning speed of artificial PU laminate was tested in comparison to leather, it showed a burn length of +82%*. If we go back the race, it means the PU is the hare that finishes almost twice as fast! Now, in a starting car fire, that means a difference between having two minutes or just one.
Chemical use in fire safety
Within the EU, the chemical use of chemicals is carefully monitored. The leather industry is always looking to reduce its environmental footprint and looks for safer water-based chemistry when It comes to improving fire safety of interior materials. This way, leather manufacturers provide high safety standards, but with a lower environmental impact, to make the difference there where it matters most.
This is not a new operation for the French luxury group, which owns 75 fashion maisons. LVMH group has been implementing a global strategy of sustainable development with suppliers thanks to the LVMH Métiers d'Art project. In the past, they have joined the Koh brothers to develop Heng Long tannery in Singapore; in 2012 they have acquired the French Roux tanneries and in 2015 acquired a stake in the Spanish tannery Riba-Guixà.